Installation Proecdure

This section describes the procedure for the installation of E-O-E. This procedure supports two environments.

1. Interactive UNIX System 5.
2. SUN-OS

Interactive UNIX System 5

The E-O-E is installed on your disk using the sysadm utility.

Follow these instructions.

1. To begin the installation, use the System Administration command, sysadm, or log in as sysadm to access the Main menu.
2. Select the softwaremgmt item.
3. Select the installpkg item. The system prompts you to insert the E-O-E diskette into the diskette drive. The screen will look similar to this:

   Insert the removable medium for the package you want to install
   into the diskette drive.
   Press <RETURN> when ready. Type q to quit.
   

4. Insert the E-O-Ediskette into the diskette drive. The system asks you to confirm that this is the package you want to install. Press ENTER to start the installation process.

SUN-OS

Follow these steps:

1. Create the /usr/public directory if it doesn't exist on your system.
2. Go to that directory.

   cd /usr/public
   

3. Insert the media into the drive, and type:

   cpio -icBdumv < device
   

   where device is your raw map tape device or raw floppy device, depending on your media.

4. From the E-O-E extraction directory, as super-user, type:

   ./install